Chapter 5 Servicing; Possible Tools Needed; Electrostatic Discharge - Fujitsu P3AM-5382-03ENZ0 Installing, Starting Up And Maintaining

Chapter 5
Servicing
5.1

Possible Tools Needed

To service a library you may need one or more of the following tools:
• Flat-blade screwdrivers (large and small)
Screwdriver for TX20 screws
•
Cross-slot screwdriver
•
• Ground strap
5.2

Electrostatic Discharge

CAUTION
To prevent electrostatic damage, observe the following precautions:
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations.
•
• Cover the library with approved static-dissipating material. Provide a wrist strap connected to the work
surface and properly grounded tools and equipment.
Keep the work area free of no conducting materials, such as ordinary plastic assembly aids and foam
•
packing.
Make sure you are always properly grounded when touching a static-sensitive component or assembly.
•
• Avoid touching pins, leads, or circuitry.
• Use conductive field service tools.
FUJITSU Storage ETERNUS LT20 S2 LTO Library Installing, Starting Up and Maintaining
Static sensitive!
A discharge of static electricity can damage static-sensitive devices or micro
circuitry. Proper packaging and grounding techniques are necessary precautions to
prevent damage.
80
Copyright 2014 FUJITSU LIMITED P3AM-5382-03ENZ0