1-3 Assembling and Installing
Step 1: Assemble the Stand
First assemble the stand, then mount the machine on top of the stand.
1
Invert the stand legs as shown in the figure. While supporting the stand legs with your hand, attach the
left- and right-hand casters.
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
Set the stand upright so that the casters are at the bottom, and place the machine on the stand.
2
The front and rear of the stand are as shown in the figure.
Chapter 1 - Getting Started
20
Hexagonal wrench
Bolts (Large)
4 pcs.
Front
Short
Long
Pipe
4 pcs.
Line up the frame at the back
of the machine with the
fixtures on the stand.