5-3 Description of Keys
Key
Top menu
LANGUAGE
Chapter 5 - Menus and Keys
100
—
This corrects cutting data to align it with printing data that
has been output. It is valid only during cutting.
—
This is used to accept, execute, or save the item shown on
the display.
—
Holding down the [TEST PRINT] key for one second or
longer while the SETUP LED is lit performs a printing test.
—
This enters the [HEAD CLEANING] menu for cleaning the
printing heads.
Cleaning can be performed while in any state.
[ALL], [A GROUP], [B GROUP], or [C GROUP]: Begins
cleaning of the printing heads. Holding down for one sec-
ond carries out cleaning for all the heads.
After cleaning, carry out a printing test to make sure there
are no problems.
—
Holding down this key for 1 second or longer performs a
cutting test.
If there are problems with the quality of cutting results for
the media, press the [CUT CONFIG] key and adjust the cut-
ting conditions.
—
This forces the blade to move up or down.
—
This enters the menu mode.
When a menu is displayed, the [
the next menu, the [
key moves to the previous screen.
—
These move the media and the cartridge.
When a menu is displayed, these move among the menu
items.
This sets the language for screen messages. You can select
either English or Japanese.
Function
] and [
] keys move to
] moves to a submenu, and the [
Setting range
Default value
—
—
—
—
—
—
—
]
—
ENGLISH/
JAPANESE
—
—
—
—
—
—
—
—
ENGLISH