Roland CAMMJET PRO II Series Installation Manual

TU-650/550/500/400 (TUC-60/70) Supplement:
Installation on the CAMMJET/SOLJET PRO II Series
About This document
If you're using one of the following printers, please refer to this
document in addition to the user's manual for this unit.
Models Covered by This Document
• CAMMJET PRO II series (such as the CJ-540)
• SOLJET PRO II series machines that support cutting
(such as the SC-540)
To install this unit on one of these models, the additional opera-
tion described here must be carried out. If your printer is not one
of these models, then you do not need to carry out the instruc-
tions in this document.
Additional Parts
The parts listed below are added to the list of items packed with
this unit that are listed in the user's manual. These parts are re-
quired when installing this unit on one of the models listed in
the previous section. For other models, they are not needed.
• Extension plate: 1
• Screws: 2
• Cap screw (small): 1