Setting The Location Where Printing Starts; Setting The Start Location - Roland SolJet PROII SC-540 User Manual

3-3 Setting the Location Where Printing Starts

Setting the Start Location

Set the location where printing or cutting starts at the desired place.
[ ], [ ], [ ], and [
(the direction of forward and backward movement) and the scan direction (the direction of movement of the printing
carriage).
Margin
(setting on the computer)
Printing area
Feed-direction start location
Feed-direction
When using [BASE POINT] key to change the print-start location, check the size of the data to print before you set the start
position.
Chapter 3 - A Wide Variety of Operations
62
] keys and the [BASE POINT] key to set the start points (origin points) for the feed direction
Next printing
Scan-direction start location
Scan-direction
* Returning the start point in the left-
right direction to its original location
Start point
(origin point)