Connecting The Cables; Connecting The Power Cord - Roland SolJet PROII SC-540 User Manual

1-4 Connecting the Cables

Use only with a power supply of the same rating as indicated on the unit.
Use with any other power supply may lead to fire or electrocution.
Ground the unit with the ground wire.
Failure to do so may result in risk of electrical shock in the even of a mechanical problem.
Use only with the power cord included with this product.
Use with other than the included power cord may lead to fire or electrocution.

Connecting the Power Cord

Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause failure during
operation. Doing so may lead to faulty operation or breakdown.
Before connecting the cable, make sure the computer's power and the main power switch of the unit are switched off.
Arrange the power cord and interface connection cable to prevent tripping when moving around the unit.
Rear
Chapter 1 - Getting Started
26
Power Connector
Power connector
Power outlet
Power cord