Loading Media; Loading Roll Media - Roland SolJet PROII SC-540 User Manual

2-3 Loading Media

Be sure to install the media guide when loading roll media.
Otherwise the roll may fall and cause injury.
Load roll media at the proper position.
Otherwise the roll may fall, resulting in injury.
Do not touch the rail or the inner side of the left and right cover. Touching
the area shown may cause the fingers to be soiled by grease or ink, and may
result in diminished image quality.

Loading Roll Media

Open the front cover.
1
Move the media clamps to the left side of the
2
platen.
Align the media flange with the roll media edges,
3
matching the roll media center ID.
Media clamp
Rail portion
Do not put hands inside
Media flange
2 in.
Continued on the next page
Chapter 2 - Basic Operation
3 in.
39