Step 1: Assemble The Stand - Roland SJ-740 User Manual

1-3 Assembling and Installing

Step 1: Assemble the Stand

First assemble the stand, then mount the machine on top of the stand.
Invert the stand legs as shown in the figure. While supporting the stand legs with your hand, attach the
1
left- and right-hand casters.
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
2 Set the stand upright so that the casters are at the bottom, and place the machine on the stand.
The front and rear of the stand are as shown in the figure.
Chapter 1 - Getting Started
20
Hexagonal wrench
Bolts (Large)
4 pcs.
Front
Short
Long
Pipe
4 pcs.
Line up the frame at the
back of the machine with
the fixtures on the stand.