Assembly And Ink Filling; Checks Before Operations; Step 1: Assemble The Stand And Mount The Machine On The Stand - Roland VersaUV LEC2-330 Setup Manual

2. Assembly and Ink Filling

Checks before Operations

Completed Drawing
Necessary Tools (Included Items)
• Hexagonal wrench (1)
• Pipe (Use this when the hexagonal wrench is too short to easily tighten bolts) (1)
• Bolts (40)
• Washers (12)

Step 1: Assemble the Stand and Mount the Machine on the Stand

WARNING
CAUTION
24
Perform this task with all power switches left switched off.
Failure to observe this instruction may cause the machine to move suddenly,
resulting in injury.
Unloading and emplacement are operations that must be performed by six persons
or more (four persons or more for the 30-inch model).
Tasks that require undue effort when performed by a small number of persons may
result in physical injury. Also, if dropped, such items may cause injury.