Stopping Printing Or Cutting Operations; Pausing Printing Or Cutting Operations - Roland SolJet PROII SC-540 User Manual

3-7 Stopping Printing or Cutting Operations

Stopping Printing or Cutting Operations
Stopping Printing or Cutting
1 Press the [PAUSE] key.
Halt transmission of printing instructions from
2
the computer.
Hold down the [SETUP] key for one second or
3
longer. Any remaining data is cleared.

Pausing Printing or Cutting Operations

Press the [PAUSE] key. The PAUSE LED lights up.
To resume printing
Press the [PAUSE] key again. The PAUSE LED goes out.
Chapter 3 - A Wide Variety of Operations
72
The PAUSE LED lights up
The SETUP LED flashes
The PAUSE LED lights up
The PAUSE LED goes out