Assembling And Installing; Step 1: Assemble The Stand - Roland VERSAUV LEC-300 Setup Manual

3. Assembling and Installing

Step 1: Assemble the Stand

WARNING
1.
Attach the stand legs to the stay.
Place the stay on the accessories box.

Place at the center of
the stay.
Accessories box
Attach the left and right stand legs to the stay.

Loosely tighten the locations shown in the figure.
Hexagonal
wrench
Stand leg (Left)
22
Unpacking and installation must be carried out by six or more persons.
Otherwise the machine or the stand may fall, resulting in injury.
Stay
3 places
Bolt
Stay
Use this box.
3 places
Hexagonal
wrench
Stay
Bolt
Stand leg (Right)