3. Assembling and Installing
Step 1: Assemble the Stand
CAUTION
1.
Attach the stand legs to the stay.
Place the stay on the accessories box.
Place at the center of
the stay.
Accessories
box
Attach the left and right stand legs to the stay.
Loosely tighten the locations shown in the figure.
3 places
Hexagonal
wrench
Stand leg (Left)
Unpacking and installation must be carried out by six or more
persons.
Otherwise the machine or the stand may fall, resulting in injury.
Stay
Stay
Hexagonal
wrench
Bolt
Use this box
Stay
3 places
Bolt
Stand leg (Right)
23