Four-Port 10 Mb Mm Fiber St Modules - GarrettCom Magnum 6K25e Installation And User Manual

Magnum 6K25e Gigabit Fiber Switch
(MDIX) feature to eliminate the use of cross-over cable, and the two fiber ports operate
at 100Mbps full-duplex (default). User mode control per port through the MNS software
is also the same.
On Magnum "4+2" Combo modules, there are four LED's for each RJ-45 port,
which indicate status the same as described for the 6K8-RJ45 in Section 2.2.3 above. The
fiber port's LEDs indicate status the same way as described for the SFF fiber modules in
Section 2.2.2 above. Color-coding on the panel of the module shows which LEDs
belong to which port.
1
10/100
F/H
ACT
F/H
2 TX LK
4@ RJ-45 + 2@ 10 Mb ST
the module is as described for those port types above. For detailed information about
10Mb mm ST fiber half of the module, see Section 2.2.5.
1
10/100
F/H
ACT
F/H
2 TX
ports. The 4@ RJ-45 + 2@ 10 Mb ST
and the RJ-45 half of the module is as described for those port types above. For detailed
information about 10Mb mm ST fiber half of the module, please check section 2.2.5.
2.2.7

Four-Port 10 Mb mm Fiber ST Modules

The 4port @10Mb ST fiber modules behave the same as the 8@100Mb ST
www GarrettCom com .
3 5
ACT
F/H
TX LK
RX 6
3 5
ACT
F/H
TX
LK RX 6
ACT
F/H
TX LK RX
1
ACT
F/H
2 TX LK RX
.
Installation and User Guide (10/07)
7
LK
port modules are also available with
4@ MTRJ 100Mb mm SFF fiber and
ACT
2@10Mb fiber mm ST ports, and with
RX 4@ RJ45 10/100 copper and 2@10Mb
fiber mm ST ports. The
operation of the SFF fiber and the RJ-45 half of
7
six-port modules are also available
LK
with 4@ MTRJ 100Mb mm SFF
ACT
fiber and 2@10Mb fiber mm ST
ports, and with 4@ RJ45 10/100
LK RX
copper and 2@10Mb fiber mm ST
ACT
F/H
TX LK RX
5
ACT
F/H
T LK R
6
13
The Magnum Combo six-
The Magnum Combo
operation of the SFF fiber