Managed Network Software (Mns-6K) For 6K25E-Series - GarrettCom Magnum 6K25e Installation And User Manual

Magnum 6K25e Gigabit Fiber Switch
its free buffer queue space is low, the Switch prevents more frames from entering by
forcing a collision signal on all receiving half-duplex ports in order to stop incoming
traffic.
2.2.11 Managed Network Software (MNS-6K ) for Magnum 6K25e-Series
Magnum 6K25e's come with Rel3.7 licensed MNS-6K software, which allows the user
to configure the Magnum 6K25e as a Managed Switch and implements security features
and other software enabled features.
(NOTE: Magnum 625e managed switch will work with Rel 3.7 firmware or higher
version only, using any other MNS-6K version will not support the 6k25e hardware)
For additional information about MNS-6K, see the Magnum MNS-6K
Software User guide in pdf format, a separate document normally accessible via your
ftp://ftp.garrettcom.com/
web-browser, at
or FTP client program at
user : m6kuser
password : m6kuser
All MNS-6K software information, including new releases and upgrades related to MNS-
6K software, can be accessed and download from GarrettCom's FTP site.
Alternatively, for the latest documentation and information, or needed
GarrettCom's MIBs for SNMP, visit
www.GarrettCom.com/techsupport/index.htm#software
Magnum MNS-6K info.
For interactive training software which shows basic and advanced info about
the Magnum MNS-6K management software and for a useful tool for first time users,
Magnum MNS-6K Operator Training
visit
You may also email:
www GarrettCom com .
ftp.GarrettCom.com
info@GarrettCom.com
.
Installation and User Guide (10/07)
using
.
for further information.
16
and look for the