Inspecting The Package And Product; 6Kpm Module Description - GarrettCom Magnum 6K25e Installation And User Manual

Magnum 6K25e Gigabit Fiber Switch
5.1

Inspecting the Package and Product

This section applies only to PMs shipped as separate items, i.e., 6K25e PMs
not factory installed in a Magnum 6K25e PM slot.
installing a 6K25e PM; notify the carrier of any damage you believe occurred
during shipment or delivery. Inspect the contents of this package for any signs
of damage and ensure that the items listed below are included.
This package should contain:
keep the shipping container should you need to ship any of the PMs separately
at a later date. In the event there are items missing or damaged, contact your
supplier. If you need to return the unit, use the original shipping container if
possible. Refer to Chapter 5 for specific return procedures.
5.2

6KPM Module Description

Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since
the Magnum 6K25e Switches have dual-speed capability for copper ports, the 6
or 8-port interfaces are designed to support all standard Ethernet media types at
10 or 100Mps speed. Each 6K25e PM provides six or eight ports for
connecting Ethernet segments with its individual connector type and media.
www GarrettCom com .
Examine the shipping container for obvious damage prior to
1 or more 6K25e PMs
Installation instructions, with illustrations
Remove the 6K25e PM(s) from the shipping container. Be sure to
An important feature of the Magnum 6K25e is the use of Port
For a list of 6K25e Port Module types, refer to Section 1.2
Each 6K25e PM is individually described in the following sections.
NOTE: The port #1 on the RJ-45 ports on all the modules, either all
RJ-45 ports or used for COMBO module is set as (=) other user ports.
.
Installation and User Guide (10/07)
43