Navigation Settings - BENDIXKing AV8OR User Manual

AV8OR User's Guide
Soft Key
Auto Time
Correction to GPS
Use Auto Time Zone
Set Time Zone
Compare GPS and
device times

NAVIGATION SETTINGS

You can control how Go Drive behaves during navigation. Tap the
following soft Keys:
Soft Key
Keep Position on
Road
Pub. No D200803000008
2008.
© Honeywell International Inc. Do not copy without express permission of
Automotive Mode Operation
Use this feature to synchronize the clock of
your device to the very accurate time
provided by the GPS receiver.
Use this feature to synchronize the time zone
of the clock of your device to the time zone
based on your current GPS position. This is
useful if you travel abroad.
Set time zone manually if you do not want to
synchronize the time zone automatically.
This allows you to use Auto Time Correction
and apply a time zone offset to obtain the
desired time.
The current time of the GPS receiver and the
device clock are displayed. Please note that
the GPS clock is only available with GPS
reception. This allows you to check whether
any correction is needed.
, ,
This feature allows car drivers to always
correct GPS position errors by matching the
vehicle position to the road network. For
pedestrian navigation, this feature is
automatically disabled to let the software
show your exact position. By turning off this
feature you also turn off the GPS position
error filtering. The position shown on the
map will be subject to all position errors and
position fluctuations.
Page 4-109
Honeywell.
Description
.
Description
Revision July