Gps Settings - BENDIXKing AV8OR User Manual

AV8OR User's Guide
Soft Key
Warn if Too Fast
for a Pedestrian
Safety Mode

GPS SETTINGS

You can set up the connection to the GPS receiver. Tap the
following soft Keys:
Soft Key
GPS receiver ...
GPS Enabled
Port
Baud Rate
Autodetect
Pub. No D200803000008
2008.
© Honeywell International Inc. Do not copy without express permission of
Enable this warning to be alert if pedestrian
mode is activated and you drive fast. You are
asked if you want to change to car navigation
mode. This way you can be sure you will not be
routed via one-way roads in the wrong direction
as a pedestrian could, for example.
Safety Mode disables the touch screen above
10 km/h (6 mph) to keep your attention on the
road. While driving, you will not be able to set a
new destination or to change settings. The only
screen control that remains enabled is the
gesture that puts you back on the Map screen.
, ,
The first line of the screen informs you about
the connection status of the GPS receiver.
Connecting the GPS receiver is automatic, so
normally you will not need this screen of
settings at all.
Turn the connection to the GPS receiver on or
off. Turning off the GPS receiver can be
useful for indoors use or demonstration
purposes.
The communication port used between the
GPS receiver and the application.
The communication speed used between the
GPS receiver and the application.
Tap this soft Key to find and connect the
GPS receiver.
Page 4-112
Honeywell.
Automotive Mode Operation
Description
.
Description
Revision July