Notepad - BENDIXKing AV8OR User Manual

AV8OR User's Guide
Messages Function
Message Text
WPT from file
Failed to merge user
WPT from file
Not enough available
space to merge user
WPTs
Failed to merge FPL
WPT
Not enough space to
merge flight plans
Duplicate user WPT
in flight plan file
User Waypoint
memory full
Flight plan WPT(s)
not found in
database have been
deleted
Error writing flight
plan data to data
card
Unable to save a
flight plan backup
Unable to convert
flight plan data after
DB update, all user
flight plans deleted
Battery Low

Notepad

Tap on the NOTE PAD soft key to display customized checklists.
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
Aviation Mode Operation
Cause
from a flight plan file.
While merging WPTs from a flight plan
file, a WPT was found with an ident
matching an existing WPT, but at a
different location.
There is not enough memory to merge
in WPTs from a flight plan file.
A user WPT in a merged flight plan was
not found in the user WPTs data.
There is not enough memory to merge
in flight plans from a flight plan file.
While loading user WPTs from a flight
plan file, a WPT was found with an ident
matching an existing user WPT.
A WPT loaded from a flight plan file
could not be stored because user WPT
memory was already full.
When one or more of the WPT
references in a flight plan file do no
exist in the database
When the software encounters an error
while trying to write a flight plan file.
All attempts to back up the flight plan
data failed.
When the system detects a changed
database but cannot find a current
backup of the flight plan resulting in all
user flight plans to be deleted
Generated when the battery level
remaining drops below 25% of full
charge
Page 3-69
Honeywell.
Revision July 2008.