Bypass A Wpt With A Flight Plan Active; Figure 3-35: Re-Center Aircraft – Step 1 - BENDIXKing AV8OR User Manual

AV8OR User's Guide Aviation Mode Operation
VFR Moving Map Function
create a new course line to the destination from the aircraft's present
position by using the steps that follow:
Tap the soft key from the Map page to display the virtual
keyboard. The active Direct-To destination will already be filled in on
the keyboard.
Figure 3-35: Re-center aircraft – Step 1
Tap the Enter soft key to use the entered WPT and re-center the
course line from the aircraft's present position to the destination.

Bypass a WPT with a flight plan active

When a flight plan is active, the pilot may want to bypass one of the
WPTs in the flight plan and go direct to one of the other WPTs. Use
the steps that follow to bypass a WPT.
The active course shows as a magenta line on the Map.
Pub. No D200803000008 Page 3-32 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.