Using The Cursor (The Selected Map Location) - BENDIXKing AV8OR User Manual

AV8OR User's Guide
Icon

USING THE CURSOR (THE SELECTED MAP LOCATION)

First, place the Cursor at the desired map location with one of the
following options:
•
Use the Find menu to select a location. The map returns with the
selected point (the Cursor) in the middle, and the Cursor menu
appears with the available options.
•
Tap the screen and tap again to place the Cursor at the desired
location. Now tap
You can perform the following actions:
Soft Key
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
Status
for
Vehicle The symbol displays the vehicle type
type used for route calculation.
to open the Cursor menu.
In the active route, uses the Cursor as the
start point by replacing the current GPS
position (available in Advanced mode
only)
In the active route, uses the Cursor as the
destination by replacing the previous
destination
In the active route, uses the Cursor as a
via point (an intermediate destination)
preceding the destination (available in
Advanced mode only)
In the active route, uses the Cursor as the
destination while keeping the previous
destination as a via point (available in
Advanced mode only)
Shows the different routes calculated by
the available routing methods. Choose
the one that suits your needs the
best.(available in Advanced mode only)
Page 4-22
Honeywell.
Automotive Mode Operation
More information
Action
Revision July 2008.