Navigation Settings - BENDIXKing AV80R User Manual

Soft Key
Set Time Zone
Compare GPS and
device times

Navigation Settings

You can control how GoDrive behaves during navigation. Tap the
following soft Keys:
Soft Key
Keep Position
Road
Off-route
Recalculation
D200803000008
Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King AV8OR Handheld User's Guide
Description
Set time zone manually if you do not want to
synchronize the time zone automatically.
This allows you to use Auto Time Correction
and apply a time zone offset to obtain the
desired time.
The current time of the GPS receiver and the
device clock are displayed. Please note that
the GPS clock is only available with GPS
reception. This allows you to check whether
any correction is needed.
, ,
Description
on This feature allows car drivers to always
correct GPS position errors by matching the
vehicle position to the road network. For
pedestrian
automatically disabled to let the software
show your exact position. By turning off this
feature you also turn off the GPS position
error filtering. The position shown on the
map will be subject to all position errors and
position fluctuations.
This switch tells GoDrive whether to
automatically recalculate the route when you
deviate from it. If this feature is turned off,
you need to initiate route recalculation
manually
stopped until you return to the originally
recommended route. Setting another point
than the current GPS position as the start
point of the active route will automatically
disable this feature.
navigation,
otherwise navigation
Automotive Mode Operation
.
this feature
will
Page 3-113
is
be