BENDIXKing AV8OR User Manual page 104

AV8OR User's Guide
Messages Function
Message Text
Internal GPS failure
Nav data Referenced
to True North
Nav data Referenced
to User-Defined Mag
Var
Unit Configuration
validation errors
found, values set to
default.
User setting
validation errors
found, values set to
default.
Unit Configuration
cleared to Defaults
All User Settings
cleared to Defaults
Failed to save user
settings
Unit History Data
cleared to Defaults
Detailed terrain
database is invalid
Failed to read FPL
file
The FPL file had
formatting errors
Failed to read user
WPT from file
Failed to read flight
plan from file
Failed to read FPL
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
Aviation Mode Operation
Cause
When the internal GPS is configured
but no data is being received from it
When the operator has elected to use a
manually input magnetic variation offset
of ZERO
When the operator has elected to use a
manually input magnetic variation rather
than AUTO
Some System setting were out of range
and were set to defaults
Some User settings were out of range
and were set to defaults
The System settings NVM could not be
used so default settings were used
instead
The User settings NVM could not be
used so default settings were used
instead
All attempts to save & back up
User/System/Volatile data failed.
The Volatile settings NVM could not be
used so default settings were used
instead
The fine terrain database could not be
loaded from the card or its checksum
was found to be invalid.
A flight plan file could not be read.
The format of a flight plan file was
incorrect.
User WPTs could not be read from a
flight plan file.
a flight plan could not be read from a
flight plan file.
A flight plan WPT could not be read
Page 3-68
Honeywell.
Revision July 2008.