Table of Contents
Advertisement
AV8OR User's Guide
Note
Even if you move the map while you are driving, Go Drive
!
continues navigating if there is an active route: it plays the
voice instructions and displays the turn preview icons
according to your current GPS position.
Selected Location (Cursor)
If you select a location in the Find menu, or you tap the map when
the map control soft Keys are visible, the Cursor appears at the
selected point on the map. Go Drive displays the Cursor with a
radiating red dot (
when it is in the background of a 3D map view.
When the Cursor is set, tap
you can use the Cursor as one of the following:
•
The start point of a route
•
A via point in a route
•
The destination of a route
You can also search for POIs around the Cursor. Or you can save
the location of the Cursor as:
•
A Favorite
•
A Road Safety Camera
•
A POI
•
A map marker Pin
Original Position in the Cursor Menu
When the Cursor menu is open, a special icon (
Cursor position the menu was opened with.
You can move and zoom the map, and you can set the Cursor to a
different place. The usual cursor (
of the Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap
back to the position with which the Cursor menu was opened, and
the
icon appears again.
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
Automotive Mode Operation
) to make it visible at all zoom levels, even
. The Cursor menu appears and
Page 4-25
Honeywell.
) shows the
) appears, and the soft Keys
. The map jumps
Revision July 2008.
Advertisement
Table of Contents
