Re-Center Aircraft When Direct-To Is Already Enabled; Figure 3-34: Map – Entered Waypoint Info - BENDIXKing AV8OR User Manual

AV8OR User's Guide Aviation Mode Operation
VFR Moving Map Function
After the Enter key is tapped, a Waypoint Entry screen shows
detailed information about the entered location.
Figure 3-34: Map – Entered Waypoint Info
Tap the CANCEL soft key to cancel the Direct-To and return to the
virtual keyboard page to enter a different location or to Esc back to
the Map page.
Tap the MORE INFO soft key to see additional information about the
location. If additional pages are available, the NEXT INFO soft key
shows. When finished browsing the additional data, tap the CLEAR
soft key to return to the WayPoint Entry Screen.
Tap the OBS soft key to start an OBS course and show the
magnetic heading from your present position to the WPT.
Tap the DIRECT TO soft key to accept the entered location. The
system sets a new course from the aircraft's present position directly
to the entered WPT's position and shows the new Direct-To course
on the Map.

Re-center aircraft when Direct-To is already enabled

When flying on a course using the Direct-To function, if the aircraft
gets away from the course line on the map, the pilot can easily
Pub. No D200803000008 Page 3-31 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.