Table of Contents
Advertisement
AV8OR User's Guide
Appendix
EXTERNAL FLIGHT PLANS
Jeppesen FliteStar© PC Application
The AV8OR can use flight plans created by the Jeppesen FliteStar©
PC application. Flight plans can be created and modified using the
Jeppesen tool. The flight plans need to be saved using the "Export
as Text" option, with the filename "Route.txt". This file must then be
transferred to the SD card and stored in the GoFly\data\user
directory.
When creating routes using the Jeppesen FliteStar© tool, only the
WPTs under the "route" directory should be exported. If there are
identifiers, airports, WPTs, etc in the "Other Charts" directory they
will be appended to the end of the flight plan when it is
exported. When this flight plan is imported into the Aviator, these
extra items will be treated as extra WPTs resulting in a flight plan
different than the one created using FliteStar©.
Pub. No D200803000008
Page 7-15
Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Advertisement
Table of Contents
