BENDIXKing AV8OR User Manual page 234

AV8OR User's Guide
Soft Key
Recalculate to
Avoid Traffic
Vehicle Types:
•
Car
•
Taxi
•
Bus
•
Emergency vehicles
•
Bicycle
•
Pedestrian
Road Types Used for Route Planning:
Type
Motorways You might need to avoid motorways when you are
driving a slow car or you are towing another vehicle.
Unpaved Go Drive excludes unpaved roads by default:
roads unpaved roads can be in a bad condition and usually
you cannot reach the speed limit on them.
Toll roads By default Go Drive includes toll roads (pay roads
where there is a peruse charge) in the routes. If you
disable toll roads, Go Drive plans the best toll-free
route.
Charge Charge roads are pay roads where you can purchase
roads a pass or vignette to use the road for a longer period
of time. They can be enabled or disabled separately
from toll roads.
Pub. No D200803000008
2008.
© Honeywell International Inc. Do not copy without express permission of
Automotive Mode Operation
This setting determines how Go Drive uses
the received TMC information in route
recalculation: • Automatic: When route
recalculation becomes necessary based on
the received TMC events, Go Drive
recalculates the route automatically. • Manual:
When route recalculation becomes necessary
based on the received TMC events, Go Drive
notifies you, but you can decide whether to
recalculate the route or not. • Disabled: TMC
events are only taken account when the route
is recalculated in an off-route situation.
Description
Page 4-106
Honeywell.
Description
Revision July