Miscellaneous - Compuprint 914 User Manual

Appendix A

Miscellaneous

BEL
This command sounds the buzzer for about 1 seconds.
BS
Terminator code. This code causes the printing to be continued from one column
to the left of the current carriage position.
CAN
This command causes the printer to delete data in the same line before the CAN
code. Commands except SO and ESC SO are not affected.
DEL
This command causes the printer to delete the last character sent to the printer.
This does not affect control codes.
CR
Terminator code. The column counter is set to the left margin value and a line
feed is inserted automatically after carriage return A line feed may be added if the
AUTOFEEDXT signal is held LOW and the AUTO XT function is selected in the
Printer Setup.
A.28
Sounds the buzzer.
07
7
Moves the printer carriage one character to the left.
08
8
Cancels data on same line.
18
24
Deletes last character sent (only EPSON mode).
7F
127
Causes all received data to be printed out.
0D
13
A78401745-001