Compuprint 914 User Manual page 53

Function 50 INTERFACE
Selects the parallel or serial interface.
01 PARALLEL
02 SERIAL
Function 51 SELECT-IN SIGNAL
Enables the function of the SELECT IN pin in the parallel interface. (EPSON
mode only).
01 VALID
02 INVALID
Function 52 AUTOFEED-XT SIGNAL
Enables the function of the AUTOFEED XT pin in the parallel interface.
(EPSON mode only).
01 VALID
02 INVALID
Function 53 PROTOCOL
Selects the serial protocol.
01 R/B
(READY/BUSY)
02 XON/XOFF
Function 54 BAUD RATE
Selects the data transfer rate for the serial interface (in bits per second).
01 300BPS
02 600BPS
03 1200BPS
04 2400BPS
05 4800BPS
06 9600BPS
Function 55 BIT LENGTH
Selects the number of data bits for the serial interface
01 8
02 7
A78401745-001
Chapter 3
3.21