Setting Spacings - Compuprint 914 User Manual

Appendix A

Setting Spacings

ESC P
Terminator code. The spacing is set to 17 cpi if the compressed printing has been
previously selected by SI or ESC SI command.
ESC M
Terminator code. The spacing is set to 20 cpi if the compressed printing has been
previously selected by SI or ESC SI command.
ESC :
Terminator code.
ESC g
Terminator code. Compressed printing cannot be combined with 15 cpi.
SI or ESC SI
Terminator code. In IBM mode, this command sets horizontal spacing to 17 cpi
(compressed spacing), if 10 cpi has been previously set; otherwise it is ignored.
In EPSON mode, the setting of this command depends on the horizontal spacing
previously set: 10 cpi is changed into 17 cpi, 12 cpi is changed into 20 cpi
A.8
Sets horizontal spacing to 10 or 17 cpi (only EPSON
mode)
1B 50
27 80
Sets horizontal spacing to 12 or 20 cpi (only EPSON
mode.)
1B 4D
27 77
Sets horizontal spacing to 12 cpi (only IBM mode).
1B 3A
27 58
Sets horizontal spacing to 15 cpi (only EPSON mode)
1B 67
27 103
Selects compressed printing.
0F or 1B 0F
15 or 27
A78401745-001