Compuprint 914 User Manual page 93

DC2
Terminator code. In IBM mode, the compressed horizontal 18 spacing is reset to
10 cpi. In EPSON mode, the 17 cpi compressed spacing is reset to 10 cpi while
the 20 cpi compressed spacing is reset to 12 cpi.
ESC p {n}
Terminator code. If {n} = {1}, proportional printing is set. If {n} = {0r},
proportional printing is reset.
ESC P {n}
Terminator code. If {n} = {odd number}, proportional printing is set. If {n} =
{even number}, proportional printing is reset.
ESC A {n}
This command changes the default vertical spacing to n/60 inch (EPSON LQ and
IBM Proprinter XL24 AGM modes) or n/72 inch (IBM Proprinter XL24 mode).
ESC 2
In IBM Proprinter XL24 mode, the default vertical spacing is either the value
specified by a previous ESC A command or the value previously set via Printer
Setup procedure.
In IBM Proprinter XL24 AGM mode, this command has no effect. In EPSON
mode, the default vertical spacing is 1/6 inch.
Resets compressed spacing.
12 or 1B 12
18 or 27
Sets or cancels proportional printing (only EPSON
mode).
1B 70 {n}
27 112 {n}
Sets or cancels proportional printing (only IBM
mode).
1B 50 {n}
27 80 {n}
0 ≤ n ≤ 255
Sets variable vertical spacing.
1B 41 {n}
27 65 {n}
0 ≤ n ≤ 85
Sets vertical spacing to default value.
1B 32
27 50
A78401745-001
Appendix A
A.9