Compuprint 914 User Manual page 63

Loading Paper From The Bottom Paper Path
1.
Move the tractor set lever of the left
tractor forward to unlock the tractor.
Move the left tractor so that the printing
starts from your desired print start
position. Move the tractor set lever of the
left tractor rearward to lock the tractor.
Move the tractor set lever of the right
tractor forward to unlock the tractor.
2.
Move the right tractor to adjust the
tractor to the paper width. Open the left
and right tractor covers. Move the gap
set lever to position 6. Insert the paper
into the printer from the slot at the
bottom of the printer .Load the paper
and align the paper holes with the
tractor pins of the left and the right
tractor, respectively.
Make sure that the paper is correctly aligned with the left and right
tractors.
3.
Close the left and right tractor covers.
Slide the right tractor to take up any
slack in the paper. Move the tractor set
lever of the right tractor to lock the
tractor. Move the gap set lever to the
proper position to set the paper
thickness.
A78401745-001
Chapter 3
Tractor set
3.31