Chapter 4
Cleaning The Printer
Make sure the printer has been turned off for at least 15 minutes
before starting any cleaning operations.
Periodic cleaning will help keep your printer in top condition so that it will
always provide optimal performance.
Use a neutral detergent or water solution on a soft cloth to clean dirt and
grease from the cabinet of the printer.
Do not use an abrasive cloth, alcohol, paint thinner or similar agents
because they may cause discoloration and scratching.
Be especially careful not to damage the electronic and mechanical
components.
Replacing The Ribbon Cartridge
Make sure that the printer is turned OFF.
The print head becomes extremely hot during operation. Turn the
printer off and wait approximately 15 minutes before moving the
carriage.
1.
R emove the carriage
cover, then manually
move the carriage to the
center of the printer.
4.2
A78401745-001
Need help?
Do you have a question about the 914 and is the answer not in the manual?