The following list describes the printer status messages in alphabetical order:
EJECT ERR
CA POSITION ERR
ON LINE USER *
OFF LINE USER *
PAPER EMPTY ERR
PAPER JAM
This message is displayed when a paper eject error
has ocurred (ERROR indicator is blinking). If the
VALID value is selected in the BUZZER function,
the alarm sounds. To clear the error, press the
,
FORM FEED/↓
LOAD-PARK/→
to eject the paper.
This message is displayed when a carrier position
error has ocurred (ERROR indicator is blinking).
If the VALID value is selected in the BUZZER
function, the alarm sounds. To clear the error, press
the
ON LINE/←
key to turn the printer on-line .
This message is displayed when the printer is
enabled to receive and to print data. The asterisk
"*" indicates the user number selected in the Printer
Setup(SELECT USER function).
This message is displayed when the printer is
disabled to receive and to print data. The asterisk
"*" indicates the user number selected in the Printer
Setup (SELECT USER function).
This message is displayed when a paper is not
present in the printer (ERROR indicator is
blinking). To clear the error, press the
key to turn the printer on-line
This message is displayed when a paper is jammed
during the paper ejection (ERROR indicator is
blinking).To clear the error, remove all jammed
paper from the printer and load the paper properly.
A78401745-001
Chapter 3
or
key
ON LINE/←
ON LINE/←
3.3
Need help?
Do you have a question about the 914 and is the answer not in the manual?