Auto Paper Loading - Compuprint 914 User Manual

When moving the friction release lever at the same time put your
fingers on the top edge of the envelope to prevent it from being
moved.
After doing that, if the envelope is pulled out from the printer, do step 2 again.
Press the
LOAD-PARK/→
then, press the
ON LINE/

Auto Paper Loading

This printer has an Auto Paper Loading function that automatically feeds the
paper to the top of form position.
The Auto Paper Loading function can be only available in Push
tractor mode.
Single Sheet
The Single Sheet can be loaded into the printer automatically when the
or
FEED/↓ LOAD-PARK/→
Printer in Off-line status.
Paper empty condition.
The friction release lever is set at the Friction position.
If the Auto Paper Loading fails, a paper jam error (the ERROR
indicator blinks) or a paper empty error will occur (the ERROR
indicator blinks and the buzzer sounds). Make sure that all four
above conditions have been performed and then try to load the
paper again.
key to feed the envelope to its print start position an
← key to make the printer ready for printing.
key is pressed and the following conditions are performed:
A78401745-001
Chapter 3
FORM
3.33