Siemens SISTORE AX9 User Manual page 28

Configuration
28
Siemens Building Technologies
Fire & Security Products
Use the arrow keys to highlight the first character you want in the Site Title and
press the button. That character appears in the title bar and the cursor
moves to the next position. Pressing
lower case keyboards,
You can use up to 20 characters including spaces in your title.
Once you have entered your title, highlight Close and press the
After you have created a title, assigned a unit ID number and selected a
language, you can save your changes by highlighting OK and pressing the
button. Selecting Cancel exits the screen without saving the changes.
The box beside Version displays the software version of the DVR.
NOTE:
You can upgrade the software only in the System Information Change screen.
To upgrade the software, connect the USB device containing the upgrade
package file to the DVR. Highlight Upgrade... and press the
System Upgrade screen appears. The screen displays the upgrade package file
name.
System upgrade via USB port might NOT be completed properly if the USB
CAUTION device has been connected to the other USB port. Please remove any other
USB device before system upgrade is attempted.
NOTE:
If the file system on the USB-IDE hard disk drive or USB flash drive is NOT FAT16 or FAT32 format,
format the drive using FAT16 or FAT32 format.
Fig. 25 System Upgrade screen.
Select Start and enter the Admin password to start the upgrade. The system
restarts automatically after completing the upgrade.
NOTE:
Only the system administrator can upgrade the software.
NOTE:
You cannot upgrade software during clip copy.
toggles between the upper and
backspaces, and deletes entered characters.
button.
button. The
SISTORE AX9 AX16_EN.doc
09.2004