Connecting the Video Source
Connecting the Loop Through Video
Connecting the Monitor
Siemens Building Technologies
Fire & Security Products
Video input connectors.
Connect the coaxial cables from the video sources to the BNC Video In
Video Loop Through connectors.
If you would like to connect your video source to another device, you can use the
Loop BNC connectors.
The Loop BNC connectors are auto terminated. Do NOT connect a cable to the Loop BNC unless it is
connected to another terminated device because it will cause poor quality video.
Video Out connectors.
Connect the monitor to either the Video Out or SVHS Out connector.
Connect the spot monitor to the SPOT connector if required.
If your monitor has an SVHS input, use it for better quality video display.
The Video Out (BNC) and the SVHS Out connectors may be connected to individual monitors for
SISTORE AX9 AX16_EN.doc