System Group - Paradyne 7610 SNMP DSU User Manual

System Group

System Group objects are fully supported by the unit.
7610-A2-GB20-10
Table C-1. System Group Objects
Object Description
sysDescr Provides a full name and
( system 1) version identification for the
system's hardware and
software.
sysObjectID Identifies the network
( system 2)
management subsystem.
sysContact Provides the textual
(system 4)
identification of the contact
person for this managed unit.
sysName Provides an
(system 5) administratively-assigned
name for this managed unit.
sysLocation Provides the physical location
(system 6)
for this managed unit.
sysServices Functionality supported:
( system 7)
physical (1 ) – Layer 1
functionality for all
interfaces.
datalink/subnetwork ( 2 ) –
Layer 2 functionality
( SLIP/ PPP ) for all
management links.
internet ( 4 ) – Layer 3
functionality ( IP ) for all
management links.
end-to-end ( 8 ) – Layer 4
functionality ( TCP/ UDP )
for all management links.
1
The unit supports a 127-character string for this object. An error message is sent to
the NMS if an attempt is made to write (set) more than 127 characters.
November 1997
Setting/Contents
PARADYNE DDS Leased Line DSU ;
Model: 7610-A1-201;
S/W Release: yy.yy.yy;
H/W Revision: zzzz-zzz;
Serial Number: sssssss
1.3.6.1.4.1.1795.1.14.2.5.1.1
ASCII character string, as set by the
user.
1
ASCII character string, as set by the
user.
1
ASCII character string, as set by the
1
user.
Object is set to 1+2+4+8 (15).
MIB Descriptions
C-3