Paradyne 7610 SNMP DSU User Manual page 100

Extension to Interface Table (ifXTable)
This extension contains additional objects for the interface table. Supports only
the following objects.
7610-A2-GB20-10
Table C-2. Interfaces Group Objects (4 of 4)
Object Description
ifOutOctets Collects output
(ifEntry 16) statistics on data
received by the
interface. interface.
ifOutUcastPkts
Applies to the IMC and
(ifEntry 17)
the Management port,
if configured for Net if configured for Net
Link When the Link. When the
ifOutDiscards
Management port is
(ifEntry 19)
not configured as a Net
Link, these statistics ,
will not be collected, will not be collected
ifOutErrors
and an error status will
(ifEntry 20)
be sent if access is
attempted.
Table C-3. Extension to Interface Table (ifXTable)
Object Description
ifName Provides name of the
(ifXEntry 1) interface.
ifLinkUpDown- Indicates whether the link is
TrapEnable up or down, or enterprise-
(ifXEntry 14)
specific traps should be
generated.
ifHighSpeed Reflects the ifSpeed setting
(ifXEntry 15)
for the interface.
ifConnector- Indicates whether there is a
Present physical connector for the
(ifXEntry 17) interface.
November 1997
Setting/Contents
An integer number.
Setting/Contents
Interface text strings:
Management Port
Terminal Port
DDS Network
User Data Port
In-band Management Channel
Only supports DDS network and User
data port.
SNMP Traps must be enabled for the
unit. See SNMP Traps
Table A-12.
This object is supported as read-only.
true(1) – Will always have this value for
the DDS network, Management port,
Terminal port, and User Data port.
false(2) –Will always have this value for
the In-band Management Channel.
MIB Descriptions
Option,
C-7