Enterprise Mib Objects - Paradyne 7610 SNMP DSU User Manual

MIB Descriptions

Enterprise MIB Objects

Device Configuration Variable (pdn-common 7)
Port Usage Table, pdn-devPortUsage (pdn-interfaces 3)
DDS Interface Specific Definitions, pdn-dds (pdn-interfaces 2)
Device Security, pdn-security (pdn-common 8)
Device Traps, pdn-traps (pdn-common 9)
Device Control, pdn-control (pdn-common 10)
C-18
The following lists the Paradyne Enterprise specific MIB Objects supported by the
unit.
The variable devConfigAreaCopy in the devConfigArea group is supported. This
variable allows the entire contents of one configuration area to be copied into
another configuration area. The unit only supports the following values.
Table C-13. Device Configuration Variable
Object Description
devConfig g A "get" of this object will always return noOp. noOp(1)
AreaCopy AreaCopy
Copy from active area to customer 1 area.
Copy from active area to customer 2 area.
Copy from customer 1 area to active area.
Copy from customer 1 area to customer 2
area.
Copy from customer 2 area to active area.
Copy from customer 2 area to customer 1
area.
Copy from factory area to active area. There
is only one factory area for the unit.
Copy from factory area to customer 1 area.
Copy from factory area to customer 2 area.
The Port Usage Table specifies whether the Management port is configured for
ASCII alarms, as an SNMP management link, or is disabled. Supports the values
alarm(1), netLink(3), and none(5).
The DDS Interface Specific Definitions contain objects that are used to manage
the DDS Network Interface. Fully supported by the unit.
Use the Device Security table to control the number of SNMP managers that may
access the unit, as well as the unit access level (read or read/write). Fully
supported by the unit.
Controls the SNMP managers to which the unit reports traps. Fully supported by
the unit.
Uses the devControlReset object to reset the unit. Fully supported by the unit.
November 1997
Setting/Contents
active-to-customer1(2)
active-to-customer2(3)
customer1-to-active(4)
customer1-to-customer2(5)
customer2-to-active(6)
customer2-to-customer1(7)
factory1-to-active(8)
factory1-to-customer1(9)
factory1-to-customer2(10)
7610-A2-GB20-10