Device Messages - Paradyne 7610 SNMP DSU User Manual

Messages and Troubleshooting

Device Messages

8-4
The Device Messages in Table 8-1, listed in alphabetical order, may appear in the
messages area at the bottom of the ATI screens.
Table 8-1. Device Messages (1 of 2)
Device Message What Message Indicates
Blank Entries New had been selected
Removed from the Administer Logins
screen, no entry was made,
and Save was selected.
Command Complete Action requested has
successfully completed.
1
Invalid Character ( x )
A nonprintable ASCII
character has been
entered.
Invalid – Network Network-initiated loopback
Initiated CSU (or DSU) was in progress when
Loopback Active another selection was
made.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
Invalid – [ Test ] [Test] can be a CSU, DSU,
Already Active or DTE Local Loopback, or
a Send 511 or Monitor 511.
The [test] was already in
progress when another
selection was made.
Invalid Test A loopback or 511 pattern
Combination test was in progress when
Start was selected to start
another test, or was active
on the same or another
interface when Start was
selected.
Limit of six Login IDs An attempt to enter a new
reached login ID was made, and the
limit of six login/password
combinations has been
reached.
No Security Records Delete was selected from
to Delete the Administer Login
screen, and no security
records had been defined.
1
x is the character not being accepted.
November 1997
What To Do
No action needed.
Reenter the Login ID,
Password, and Access Level.
No action needed.
Reenter information using valid
characters.
No action needed.
Try again.
Contact your system
administrator to verify your
password.
Allow test to continue.
Select another test.
Stop the test.
Wait until other test ends and
message clears.
Abort all tests from the Test
menu screen.
Stop the test from the same
screen the test was started
from.
1. Delete another login/password
combination.
2. Reenter the new login ID.
No action needed.
Enter a security record.
7610-A2-GB20-10