Table of Contents
Advertisement
7610-A2-GB20-10
When user access to the ATI is attempted through the Terminal port or a Telnet
session, the ATI response is based on the Login Required option and the
availability of the ATI.
Table 4-2. ATI Access Conditions
If access to the ATI
is through the . . .
Then . . .
Terminal port with
The Main Menu screen
Security disabled with
appears.
the
Login Required
option
set to Disable.
(See Table A-4)
Terminal port with
You are prompted for a
Security enabled with
login ID and password.
the
Login Required
option
set to Enable.
(See Table A-4)
(See Table A-4)
The Main Menu screen
appears if the login ID is
not configured yet.
Terminal port and the
User Interface Already
ATI is already in use
In Use message appears
with a Telnet session
with the active user's IP
address and Login ID.
Telnet session and the
Connection Refused
ATI is currently in use
message appears. The
DSU allows only one
connection at a time.
November 1997
What to do now?
Select a menu option to begin your
session.
If Invalid Password appears,
re-enter the password. After three
tries with an invalid password,
contact the system administrator.
Select a menu option to begin your
session.
Try again later. When the ATI is
available, the message User
Interface Idle appears.
Try again later.
Security
4-5
Advertisement
Table of Contents
Troubleshooting
