Messages and Troubleshooting
Messages and Troubleshooting
Alarm Messages
ASCII Alarms
7610-A2-GB20-10
There are many messages available to assess the status of the device and
contribute to problem resolutions. Refer to the following sections:
Alarm Messages
—
ASCII Alarms
—
ASCII Alarm Messages
—
Configuring SNMP Traps
Dialing Out SNMP Traps
—
Device Messages
Troubleshooting
Alarm messages and SNMP traps are unsolicited messages sent out from the
DSU automatically when the DSU detects conditions set by the user.
Alarm messages are sent out to an ASCII terminal or printer via the Management
port if:
Port Use is configured for Alarms. Refer to
Table A-5.
Each ASCII Alarm Message to be generated has been enabled. Refer to
Network Interface
Options, Table A-2, and
ASCII Alarm Messages option is enabled. Refer to
Table A-8.
November 1997
8
Management Port
Options,
System
Options, Table A-1.
Alarms & Traps
Options,
8-1