Paradyne 7610 SNMP DSU User Manual page 106

RS-232-Like MIB, RFC 1659
Supported for the User Data port, the Management port, and the Terminal port.
RFC 1659 is an SNMPv2 MIB, but is converted to an SNMPv1 MIB to support
this unit. This MIB consists of one object and five tables.
Number of RS-232-Like Ports Object
Supported as documented in the RFC.
General Port Table Objects
The General Port Table Objects contains configuration options for the
RS-232-Like interfaces. Clarification for objects contained in this table as it
applies to the unit is provided below.
7610-A2-GB20-10
Table C-8. General Port Table Objects (1 of 2)
Object Description
rs232PortType Identifies the port hardware
(rs232PortEntry 2 ) type.
rs232PortInSig Contains the number of
Number input signals (in the input
(rs232PortEntry 3 ) signal table) that can be
detected.
rs232PortOutSig Contains the number of
Number output signals (in the output
(rs232PortEntry 4 )
signal table) that can be
asserted.
rs232PortInSpeed Contains the port's input
(rs232PortEntry 5 )
speed in bits per second.
1
The User Data port speed is a read-only value that can only differ from the DDS
network speed if the In-band Management Channel is enabled.
2
This speed is only valid when the port is configured for asynchronous operation.
November 1997
MIB Descriptions
Setting/Contents
Supports only the following values:
rs232(2) – Identifies the
Management port and Terminal port.
v35(5) – Identifies the synchronous
User Data port which is compatible
with the V.35 standard.
The value is 2 for synchronous user
data port and 0 for both the
Management port and Terminal port.
The value is 3 for synchronous User
Data port and 0 for both the
Management port and Terminal port.
Supports the following speeds for
the:
User data port: 64,000, 62,400,
60,000, 56,000, 54,400, 52,000,
1
48,000.
2
Management port: 2400
9600, 14,400, 19,200, 28,800,
38,400.
Terminal port: 2400, 4800,
9600,14,400, 19,200, 28,800,
38,400.
2
, 4800 ,
C-13