Paradyne 7610 SNMP DSU User Manual page 99

MIB Descriptions
C-6
Table C-2. Interfaces Group Objects (3 of 4)
Object Description
ifOperStatus Specifies the current
( ifEntry 8 ) operational state of the
interface.
ifLastChange Indicates the amount
( ifEntry 9 )
of time the interface
has been up and
running.
Collects input statistics
ifInOctets
(ifEntry 10) on data received by
the interface. the interface
ifInUcastPkts
Applies to the IMC and
(ifEntry 11)
the Management port, the Management port,
if configured for Net
ifInDiscards
Link. When the
(ifEntry 13)
Management port is Management port is
not configured as a Net
ifInErrors
Link, these statistics
(ifEntry 14)
will not be collected, will not be collected
ifInUnknown
and an error status will
Protos
be sent if access is
(ifEntry 15)
attempted.
November 1997
Setting/Contents
Management port. When configured as
Net Link, up(1) and down(2) are based on
the current state of the link-layer protocol.
When configured for Alarms, the interface
is always up(1). Never in testing(3) state.
Terminal port. Always up(1); never in
testing(3) state.
User Data Port
– up(1) – No alarms
– down(2) – Alarms
– testing(3) – Test active
DDS Network Interface
– up(1) – DTR on, if supported by the
DTE
– down(2) – DTR off, if supported by the
DTE
– testing(3) – Test active
In-band Management Channel. When
enabled, up and down are based on the
current state of the physical and link layer
protocols.
– up(1) – Operational and no active test
on the DDS network interface
– down(2) – Not operational or disabled
– testing(3) – Test active on DDS network
interface
Contains the value of sysUpTime object at
the time the interface entered its current
operational state.
An integer number.
7610-A2-GB20-10