Network Leds - Paradyne 7610 SNMP DSU User Manual

Network LEDs

7610-A2-GB20-10
DM – Data Mode:
ON – DSU (DDS network interface) is sending or
receiving data, or is in DMI condition
(all 1's being received).
OFF – DDS network interface is receiving CMI codes.
OOS – Out of Service:
ON – The network has notified the DSU that
the remote unit is out of service.
Refer to
Table 6-1.
OOF – Out of Frame:
ON – DSU is detecting an out of frame
condition. Refer to
Messages, Table 6-1.
NS – No Signal:
ON – DDS network interface detects
November 1997
Monitoring the DSU
Health and Status Messages,
Health and Status
no signal. Refer to Health and
Status Messages, Table 6-1.
6-3