Ppof; Ppog; Ppon - AMX NXD-700i Operation/Reference Manual

Programming
Page Commands (Cont.)

PPOF

PPOG

PPON

76
Deactivate a specific popup page on either a specified page or the current page.
If the page name is empty, the current page is used (see example 2). If the popup page is
part of a group, the whole group is deactivated.
This command works in the same way as the 'Hide Popup' command in TPDesign4.
Syntax:
"'PPOF-<popup page name>;<page name>'"
Variable:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
Deactivates the popup page 'Popup1' on the Main page.
Example 2:
SEND_COMMAND Panel,"'PPOF-Popup1'"
Deactivates the popup page 'Popup1' on the current page.
Toggle a specific popup page on either a specified page or the current page.
If the page name is empty, the current page is used (see example 2). Toggling refers to the
activating/deactivating (On/Off) of a popup page.
This command works in the same way as the 'Toggle Popup' command in TPDesign4.
Syntax:
"'PPOG-<popup page name>;<page name>'"
Variable:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
Toggles the popup page 'Popup1' on the Main page from one state to another (On/Off).
Example 2:
SEND_COMMAND Panel,"'PPOG-Popup1'"
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).
Activate a specific popup page to launch on either a specified page or the current page. If
the page name is empty, the current page is used (see example 2). If the popup page is
already On, do not re-draw it.
This command works in the same way as the 'Show Popup' command in TPDesign4.
Syntax:
"'PPON-<popup page name>;<page name>'"
Variable:
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Panel,"'PPON-Popup1; Main'"
Activates the popup page 'Popup1' on the Main page.
Example 2:
SEND_COMMAND Panel,"'PPON-Popup1'"
Activates the popup page 'Popup1' on the current page.
NXD-700i & NXT-CA7 7" Modero Touch Panels