AMX NXD-700i Operation/Reference Manual page 51

FIG. 38
Connection Details dialog
9.
If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password
dialog box appears on the screen within the secondary browser window.
10.
Enter the Web Control session password into the Session Password field (FIG. 37). This password was
previously entered into the Web Control Password field within the G4 Web Control page on the panel.
11.
Click OK to send the password to the panel and begin the session. A confirmation message appears
stating "Please wait, Initial screen loading.".
The secondary window then shows the same G4 page being displayed on the target G4 panel. A small circle
appears within the on-screen G4 panel page and corresponds to the location of the mouse cursor. A left-mouse
click on the computer-displayed panel page is the same as an actual touch on the target G4 panel page.
NXD-700i & NXT-CA7 7" Modero Touch Panels
Configuring Communication
IP Address of touch panel
- obtained from IP Settings section of
the System Connection page
39