Ps-Poe-Af Poe Injector; Overview - AMX NXD-700i Operation/Reference Manual

PS-POE-AF PoE Injector

Overview

The PS-POE-AF PoE Injector (FG423-80) is a single-port, self-contained Power-over-Ethernet (PoE) power
supply that delivers both DC power and data to PoE-equipped devices by "injecting" DC power through a Cat5
Ethernet cable (FIG. 20).
The PoE Injector allows devices such as the 7" Modero Touch Panels to function without an additional power
connection other than an Ethernet connection.
FIG. 20 PS-POE-AF Power-Over-Ethernet Power Supply
Power-over-Ethernet (PoE) eliminates the need for an AC outlet at each device installation point, resulting in
easier and less expensive installation. It also can be used to extend the distance between the PoE devices and
standard power outlets by up to 328 feet (100 meters).
Each PoE Injector may be used for one device's power needs. Multiple devices in a
network that require PoE will require multiple Injectors.
PS-POE-AF Specifications
Output Specifications
Combined Line and Load
Voltage Regulation
Ripple
Transient Response
Protection
Input Specifications
AC Input Voltage Range
Line Frequency
AC Input Current
Protection
General Specifications
Topology
Dielectric Withstand
Spacing
NXD-700i & NXT-CA7 7" Modero Touch Panels
Excluding Cord ±1%
1% Vp-p max.
• 0.5ms for 50%
• Load Change Typical
• Foldback Overcurrent Protection
• Short Circuit Protection
100-240VAC -10%, +6%
47-63Hz
• 90VAC Input
• 0.6A max.
• Internal Primary Current Fuse
• Inrush Limiting
• Switching-Fixed
• Frequency Flyback
• Primary-Secondary 3000VAC, 4250VDC
• Secondary-Ground 500VDC
5mm Primary-Secondary
PS-POE-AF PoE Injector
19