Using The Connection Utility - AMX NXD-700i Operation/Reference Manual

Setup Pages and Descriptions
Connection Status icon:
Connection Information
Master IP
Panel IP
Connection Statistics
Messages Sent
Responses Received
Responses Missed
Close:

Using the Connection Utility

1.
From the Protected Setup page, press the Tools button. This opens the Tools menu.
2.
Within the Tools menu, press the Connection Utility button to launch the Connection Utility popup.
3.
The Connection Information notes the IP of the connected master and the IP of the panel. The
Connection Statistics show the current quality of the panel connection.
4.
Push Close when finished.
70
The icon in the upper-right corner of the utility provides a constant visual i
indication of current connection status.
A message is sent to the master once per second and expects a response.
• If it is received, the button stays green.
• If it is missed, the button goes yellow.
• After three misses (3 seconds), it will go red until a response from the master
is received, and then it will be green again.
Once per second, a user can know if the immediate area is a good wireless
area (all green), an area of limited coverage (lots of yellow, some green, some
red), or an area with no coverage (all red).
The IP Address for the connected master.
The IP Address for the panel.
The number of messages sent from the panel to the master.
The number of responses the panel has received from the master.
The number of expected responses from the master to the panel missed.
Press this button to close the popup window and return to the Protected Setup
page.
NXD-700i & NXT-CA7 7" Modero Touch Panels