Removing Keyfob; Master Users (Administrators); Zone Bypassing - Satel INTEGRA Plus User Manual

28
get confirmation that the function has been executed or information on the current status
of the system.
The installer can define the list of outputs by means of the keypad (ABAX
function [S
ERVICE MODE
or a computer with the D
15. Press the key .
16. Press the key .
17. When a prompt appears, asking you if the changes are to be saved, press the 1 key.
Keyfobs are added to the master users (administrators) in the same way.

5.8.7 Removing keyfob

1. When adding or editing a user, run the R
(depending on which keyfob is to be removed). The appropriate function is only displayed
when a keyfob has already been assigned to the user.
2. When the keyfob number and a prompt whether the keyfob is to be removed are
displayed, press the 1 key. You will be brought back to the list of functions for defining the
user parameters.
3. Press the key .
4. When a prompt appears, asking you if the changes are to be saved, press the 1 key.
Removal of a keyfob will not erase its settings (dependences between the buttons
and zones, confirmation rules, etc.). When added to the user, the new keyfob will have
the same settings as the deleted one.
The installer can remove all keyfobs, including their settings, by means of the functions
available in the service mode (S
/ R .ABAX
FOBS EM
The administrators' keyfobs are removed in the same way.
5.9

Master users (administrators)

The master users (administrators) can be added, edited and removed by the installer. There
can be 1 administrator in each object. The administrator has access to all partitions in the
object and also specifies how the system can be accessed by using the service code. Most of
the parameters which are defined for the ordinary user can be defined for the administrator
(see: section U
SERS

5.10 Zone bypassing

You can bypass / unbypass zones in the disarmed partitions. Violating a bypassed zone will
not trigger any alarm. Bypassing the zones is useful in case of damage or failure of the
detector connected to the zone, which results in malfunctioning of the alarm system (e.g.
triggering false alarms).
Zone bypassing reduces the level of protection. Prior to arming, make sure that there
are no accidentally bypassed zones in the partition, which might allow an intruder to
get access to the protected area despite arming.
If a zone is bypassed, call in the installer (service technician) immediately to repair the
defect.
S
TRUCTURE
X program ("Keyfobs ABAX" window).
LOAD
).
KEYFOB
p. 23).
User Manual
 E
HARDWARE
. RX
EM KEY FOB

TRUCTURE HARDWARE
ABAX
XPANDERS
/ R .ABAX
EM KEYFOB
E R
XPANDERS
SATEL
.
CONFIRMAT
.]
CONFIRMAT
function
.RX
EM KEY